营业时间
全天 9.00 - 18.00
电子邮件我们
现在打电话给我们
How to clean the tension spring daily?

How to clean the tension spring daily?

2021 05 18

In life, tension springs can be seen everywhere, and they are used in many jobs. tension springs are cleaned and polished in daily use.

1. Take an appropriate amount of clean water, and mix and dilute the cleaning agent A and clean water in a ratio of 1:1 or 1:2. Put the diluted solution in a plastic container for later use. Put the tension tension spring to be cleaned into the container to soak. The soaking time should not be too long. When the surface of the tension spring has no oil stains and restores the original metallic color, take it out and use it. The clean water opens the scouring, so that the surface layer has a matte actual effect.

2. Take some coarse abrasives, put them in the cleaning agent, and then put them into the hexagonal drum. The volume ratio of the tension spring to the coarse abrasives is 1:3, and the amount of cleaning agent is 1%-2% of the tension springcomponent. It is opened in the inside for plenty of grinding, and then cleaned with water, so that the scratches on the surface of the spring will not exist. This operation can improve the surface finish of the spring very well, but it is not suitable for the use of high-precision tension springs.

Under some operating conditions, this situation may also be encountered. When the operating medium or industrial products produced, even if a trace of a certain or certain metal ion is contained, it will affect the chemical process and industrial products. Quality (including gloss, color, purity, etc.). This situation is most common in industries such as nuclear fuel pharmaceuticals and pigments. At this time, the corrosion resistance levels that do not contain a certain element or are properly run are used to reduce the metal ions to the allowable limit.